Mixing pump RITMO XL FC-230/400V / Part 2 Overview, operation and service
Operation
3
Figure 45: Switching on
4. Turn the pump motor selector switch (3) to "right" position.
5. Allow the machine to run until all the wallpaper paste has emerged
from the end of the mortar hose.
6. Collect the wallpaper paste in suitable container and dispose of as
per regulations.
7. Turn the pump motor selector switch (3) to the "0" position.
5.3.8
Compressed air supply
5.3.8.1 Connecting the air hose
2
1
Figure 46: Connecting the air hose
1. Connect compressed air hose (1) at the air manifold (2).
WARNING
Never undo hose couplings while the compressed air
hose is pressurised.
5.3.8.2 Connecting the spray gun
3
1
4
2
Figure 47: Spray gun
1. Connect compressed air hose (1) to the spray gun (2).
2. Make sure that the air tap (3) on the spray gun is closed.
3. Connect spray gun (2) to the mortar hose (4).
page 40 / 76
