Mixing pump RITMO XL FC-230/400V / Part 2 Overview, operation and service
Operation
5.5.2
Feeding material to the machine
3
2
1
Figure 56: Switching on the machine
1. Turn the main reversing switch (1) to position "I".
2. Press the green pushbutton (2) control voltage "ON".
3. Empty the bagged material into the material hopper.
For initial filling with bagged material slowly pour half of
the first bag into the material hopper!
4. Turn the pump motor selector switch (3) to "right" position.
The machine starts.
4
Figure 57: Checking the consistency
5. Check mortar consistency at consistency inspection tube (4).
6. Turn the pump motor selector switch (3) to the "0" position.
The machine stops.
7. Remove consistency inspection tube (4) and clean.
5.6
Remote control
1
Figure 58: Remote control
Working with the remote control
1. Remove dummy plug (1) from control box.
2. Connect remote control.
3. The RITMO can be switched on or off via the remote control.
page 45 / 76
