Mixing pump RITMO XL FC-230/400V / Part 2 Overview, operation and service
Operation
5.13.5.1 Inserting the mixing tube cleaner
1
Figure 80: Inserting the mixing tube
cleaner
1. Remove the mixing tube cleaner (1) and cleaner shaft from the
holding device and insert them into the mixing tube.
Insert the mixing tube cleaner (1) into the mixing tube with
the scrapers pointing downward.
4
2
3
Figure 81: Cleaner shaft seat
NOTE
When inserting the cleaner shaft make sure that the
cleaner shaft (2) engages in the head of the rotor (3) and
when closing the motor tilt flange that it correctly engages
in the coupling claw (4).
page 55 / 76
