LOTUS XS 230 V horizontal continuous mixer / Part 2 Overview, operation and service
Transport, packing and storage
3.4
Transport in individual parts
Figure 5: Individual parts
To make transport easier, disassemble the machine into its individual
components:
1. The mixing tube and mixing shaft units.
2. Material hopper with support feet and frame.
3. Remove the support feet from the frame.
3.5
Transporting a running machine
CAUTION
Danger of injury from discharged mortar!
Injuries to face and eyes can occur.
Therefore:
Before opening the couplings ensure that there is no
more pressure on the hoses (observe display at mortar
manometer).
Carry out the following steps before beginning the transport:
1. First unplug the mains cable.
2. Undo all other cable connections, water supply lines and hoses.
3. Remove loose parts during crane transport.
4. Start transport.
page 14 / 48
