PFT levelling pin / Safety, overview, operation and service
General information
1.9.7
Safety devices
WARNING
Danger to life due to non-functioning safety
equipment!
Safety equipment ensures highest level of safety in oper-
ation. Even if safety devices make work processes more
complicated, they must never be disabled. Safety is only
assured when the safety devices are intact.
Therefore:
Check that the safety devices and functional and
correctly installed before starting work.
Use safety equipment at all times.
Do not obstruct access to safety systems such as
EMERGENCY STOP pushbuttons, emergency off
buttons, pull cords etc.
1.10
Intended use
1.10.1
Intended use of levelling pin
The device has been designed and constructed only for the intended
use described below.
The PFT levelling pin is used for levelling ceilings, floors, formwork,
etc.
The levelling pin enables fast and completely accurate (0.5 mm)
surface levelling and reference measurements without line of sight,
both at extremely short and long working distances of 10 to 40 metres.
(Extension up to 65 m possible!).
The PFT levelling pin can also be used to level over obstacles. The
device also works when the measurement is to take place over a wall,
for example. The measuring hose can be laid out higher than the
device location.
The simple and reliable single-user operation of the levelling pin
delivers time-saving and cost-efficient levelling.
page 15 / 40
