PFT levelling pin / Safety, overview, operation and service
Transport, packing and storage
2
Transport, packing and storage
2.1
Safety instructions for transport
Improper transport
NOTE
Damage from improper transport!
Improper transport may cause substantial property
damage.
Therefore:
When unloading the packages on delivery, as well
as transport within the company, pay attention and
observe the symbols and instruction on the package.
Use only the specified anchorage points.
Remove packaging only shortly before the assembly.
2.2
Transport inspection
On receipt check the delivery immediately for completeness and trans-
port damage.
In case of externally visible transport damage, proceed as follows:
Do not accept the delivery or under reserve only.
Note the extent of damage on the transport documentation or on
the delivery note of the carrier.
Initiate complaint process.
NOTE
Report any defect as soon as it is detected. Claims for
damages can be asserted only within the valid warranty
period.
2.3
Packaging
For packaging
The individual packages have to be packed in accordance with the
transport conditions to be expected. Only environmentally-friendly
materials were used for the packaging.
The packaging should protect the individual components until the
assembly from transport damage, corrosion and other damage. There-
fore do not destroy the packaging and remove only shortly before the
assembly.
page 17 / 40
