Safety - Service Manual - Spare Part Lists
Replacing the Felt Seal on Equipment Head
2011-04-07
15
6.) Loosening the suction seal (
if
necessary, remove rest and
adhesive residue
).
7.) Cleaning the suction nozzle
with brake cleaning or Nitro
(grease and dust free).
8.) Applying the adhesive on the
suction nozzle.
9.) Putting the felt seal on the
nozzle and pressing it firmly.
10.) Sticking in the cable into the
equipment plate (
The earth
terminal is in the top
middle
).
11.) Returning the equipment plate and bringing the
bearing in position.
