Safety - Service Manual - Spare Part Lists
Table of Contents
2011-04-07
3
1 Table of Contents
1
Table of Contents......................................... 3
2
General.......................................................... 4
2.1
Information on the Service Manual...... 4
2.2
Information on safety notes ................. 4
2.3
Explanation of symbols........................ 4
3
Safety Designation in this Manual ............. 5
4
Fundamental Safety Notes.......................... 6
4.1
Behaviour in the event of emergency.. 6
4.2
General safety notes ........................... 6
4.3
Observing the Service Manual ............ 8
4.4
Fundamental safety measures for
maintenance ........................................ 8
5
Special Safety Notes for Operation............ 9
6
Service Manual PFT BOARDMASTER
and Units..................................................... 10
7
Settings Angularity on the Y- Arm ........... 10
7.1
First, the Y –arm is checked for
angularity............................................10
8
Replacing the Felt Seal on Equipment
Head.............................................................14
9
Setting the Sawing Unit (Longitudinally,
Transversely and Five-fold).......................16
9.1
Checking and setting the cutting
angle for the sawing units ..................16
9.2
Checking the cutting angle for the
sawing units by means of a dial
gauge .................................................20
9.3
Checking and setting the inclination
angle on the sawing units...................21
10
Setting or Checking the Milling Units.......22
11
Spare Parts List ..........................................23
12
Notices: .......................................................25
