Safety - Service Manual - Spare Part Lists
Fundamental Safety Notes
2011-04-07
7
ALWAYS WEAR EAR PROTECTION!
Secure the workpiece. Use proper clamping equipments to hold the workpiece.
ATTENTION!
Prior to changing the machine units, the entire plant must be switched
off. This is done using the main switch.
Pay attention to a safe stand in order to have balance in every working position.
Avoid inadvertent switch on. Ensure that the main switch is switched off when
connecting it to the mains.
Always remain vigilant. Concentrate on your work. Proceed rationally.
This machine may be serviced only by unsuitably qualified persons.
All persons that carry out tasks on the machine must read the Service Manual and by
signing, confirm that they have understood the Service Manual.
Switch off the equipment and wait until the tool has reached the rest position, before
you leave the workplace. The mains plug must be pulled out whenever out of use,
prior to maintenance and during tool change. The main switch must be locked against
restart.
Never touch the units when the machine is running. Never lift the units by the tools
(saw blades or mills) nor touch under them. When you carry out tasks on the units
(e.g. height adjustment on saws or milling units), switch off the main switch of the
machine, and detach the machine by pulling out the mains plug. During normal work,
use the pneumatic unit-lifting equipment for lifting and lowering the units.
Never leave the tool key stuck on. Prior to switching on, check whether the key and
setting tools are removed.
Use the correct tool. Appropriate usage is described in this Operating Manual. You
achieve an optimum quality with the correct tool and ensure your personal safety.
WARNING!
Using other tools and accessories or carrying out tasks with this electric
tool, which do not conform to appropriate use can lead to accidental danger.
