Container Mixing
Pump CMP 30 4.0
Part 2: Overview –
Operation – Spare Part Lists
Intended use of air compressor
30
2021-02-10
22.2 Safety devices of air compressor
WARNING!
Danger of death due to non-functioning
safety devices!
Safety devices provide the highest possible levels of
operational safety. Even if safety devices make work
processes more complicated, they must never be
disabled. Safety is only assured when the safety devices
are intact.
Therefore:
Check that the safety devices and functional
and correctly installed before starting work.
Never deactivate safety devices.
Do not block the access to safety devices such
as Emergency OFF pushbuttons, pull cords, etc.
22.3 General setup of the air compressor
The air compressor corresponds to the national and international safety
regulations and can therefore also be used in damp rooms or in the open
air. Areas with as clean and dry air as possible should be preferred.
Make sure that the device can suck in the air unimpeded.
This applies in particular when an installation is intended.
The air compressor must be set up so that no hazardous admixtures,
such as solvents, vapours, dusts or other harmful substances, can be
sucked in. Setup is only permitted in rooms in which an explosive
atmosphere is not expected to occur.
22.4 Hot surfaces on the air compressor
General information
WARNING!
Risk of injury due to hot surface!
Surface temperatures can reach up to 100°C during
operation of the compressor. It must therefore be ensured
that the device does not come into contact with parts of
the body during use as well as for a period of time
afterwards appropriate to the degree of heating.
