Container Mixing
Pump CMP 30 4.0
Part 2: Overview –
Operation – Spare Part Lists
Preparation
36
2021-02-10
29.2 Checking the individual connector plugs
1 2 3
Fig. 37: Electrical connections
WARNING!
Danger of death due to rotating parts!
Improper operation can lead to serious injuries
or equipment damage.
The respective drives (motors) may only be
operated via the corresponding control box of
the machine.
Connect the mixer motor (1).
Connection of the vibrator (2).
Reserve (3).
29.3 Water supply connection
1 2
Fig. 38: Water supply connection
1. Close water taps (1).
2. Establish a connection to the water supply with a ¾" hose.
3. Clean and bleed the water hose from the water mains and
connect it to the water inlet (2).
NOTE!
Only use clean water that is free of particulates.
The minimum pressure is 2.5 bar when the
machine is running.
In order to vent the hose line and clean it from dirt,
the water supply line must first be flushed.
Observe the Drinking Water Protection Ordinance
in Part 1.
NOTE!
Never allow the pump unit to run dry, since this
will significantly shorten its service life.
Fig. 39: Removing the water hose
4. Remove the water hose (3) from the mixing tube.
5. Place the water hose (3) in the pump container.
6. Open the water tap from the water supply line.
3
