Container Mixing
Pump CMP 30 4.0
Part 2: Overview –
Operation – Spare Part Lists
Switching on CMP 30 4.0
2021-02-10
37
29.4 Water from water barrel connection
Fig. 40: Water pump
Water pump as suction pump AV
1000 standalone, 400 V, 3 Ph, 50 Hz,
0.6 kW item number 00492679
Fig. 41: Filter screen
NOTE!
When working with water from the barrel, the inlet
strainer must be fitted with a filter strainer
(item no. 00136619) (bleed water pump).
NOTE!
Never allow the water pump to run dry, since
this will significantly shorten its service life.
30 Switching on CMP 30 4.0
30.1 Setting the water volume
Fig. 42: Switching on
1. Turn the main switch (1) to the “I” position.
2. Press the green operation “ON” pressure switch (2).
3. Turn the step switch (3) to “0”.
4. To adjust the water quantity, press the water flow button (4).
Fig. 43: Setting the water volume
5. At the same time, adjust the expected amount of water needed
at the needle valve (5).
6. Water flow visible at the sight glass (6) of the water flow meter
and at the position of the cone.
NOTE!
Observe the specifications of the material
manufacturer.
2
3
1
4
6
5
