FERRO 100 II Part 2 Overview – Operation - Spare parts lists
Preparation
2018-03-26
27
21 Preparation
21.1
Connection of power supply
Prior to operating the machine carry out the following steps for
preparing the machine:
Fig. 23:
Risk of injury
DANGER!
Rotating pump shaft!
Risk of injury while reaching into the pump material
container.
Therefore:
During machine preparation and operation, the
protection device must not be removed.
Never reach into the running machine.
Fig. 24: Connect the power
Connect power to the 400 V construction site distribution box and the
control box of the machine.
DANGER!
Danger to life from electric current!
The connection line has to be fused properly:
Connect the machine only to a power source
with permissible RCCB (30 mA) RCD
(residual current operated device) type A.
Fig. 25: Connect vibrating unit, mixer
motor and star wheel
WARNING!
Danger to life from rotating parts!
Improper operation may lead to serious damage to
persons or property.
The respective drive (motors) must be operated only
with the control box of the machine.
Using other or external power sources is forbidden
for safety reasons.
Connect the power supply for the vibrating unit (1).
Connect the power supply for mixer motor (2).
Connect the power supply for star wheel (star wheel lock) (3).
1
2
3
