FERRO 100 II Part 2 Overview – Operation - Spare parts lists
Maintenance
48
2018-03-26
34.3
Tightening torque of tie rod screws
34.3.1 Do not load the pump unit
Fig. 78: Tightening torque
NOTE!
Tighten the tie rod screws of the pump unit with a
torque of 98 Newton metres.
NOTE!
Do not load pump unit with heavy objects.
Do not stand on the pump unit.
34.4
Replace the pump motor
Fig. 79: Threaded bolts
NOTE!
When changing the pump motor, always replace
the threaded bolts and safety nuts.
Screw in the threaded bolt up to the stop.
Threaded bolts M16x100 Article number
00614395.
Safety nuts M16 Article number 20207300
34.5
Do not load pump motor
Fig. 80: Pump motor
NOTE!
Do not load pump motor with heavy objects.
Do not stand on the pump motor.
