FERRO 100 II Part 2 Overview – Operation - Spare parts lists
Operating modes of selector switch
18
2018-03-26
14 Operating modes of selector switch
Fig. 11: Selector switch position “0”
Main switch “ON”, control voltage “ON”, Selector switch
position “0”,:
Machine is ready for operation, green control lamp lights up.
By pressing the water supply button, the water pump starts (for
adjusting the needle valve of water flow meter).
By pressing the vibrating unit button, the vibrating unit starts (to fill
the star wheel lock).
The control lamps are checked by pressing the lamp test button.
Fig. 12: Selector switch water pump
Main switch “ON”, control voltage “ON”, Selector switch water
pump “Manual”:
Water pump is in operation.
For cleaning the hoses or for water extraction by water extraction
valve.
The water quantity evident on the sight glass of the water flow
meter at the needle valve can be adjusted.
Fig. 13: Selector switch star wheel lock
Main switch “ON”, control voltage “ON”, Selector switch star
wheel lock “Manual”:
Star wheel lock is in operation.
For emptying the star wheel lock.
For initial filling of the mixer material container until the dry sensor
reacts.
