FERRO 100 II Part 2 Overview – Operation - Spare parts lists
Putting FERRO II into service
32
2018-03-26
23 Putting FERRO II into service
23.1
Risk of injury from discharged mortar
DANGER!
Danger of injury from discharged mortar!
Discharged mortar may lead to injuries to eyes and
face.
Therefore:
– Never look into the hose end.
– Always wear protective goggles.
– Always position yourself in such a way that you
are not hit by the mortar being discharged.
23.2
Automatic mode
Fig. 43: Automatic mode
Selector switch (1) to position “5” (automatic mode).
The control of the system runs in automatic operation in this switch
position “Automatic mode”.
Star wheel lock starts, while the vibrating unit simultaneously goes
into operation.
Fig. 44:
Dry-sensor
The material level in the material hopper of the horizontal mixer is
monitored by the dry sensor (2).
Upon full indication, the dry sensor switches off the star wheel lock.
Fig. 45:
Wet sensor
The material level in the material hopper of the pump container is
monitored by a wet sensor (3).
NOTE!
In order to ensure the functioning of the sensor, pay
attention to the cleanliness of the sensor rod. We
recommend cleaning every 3-4 hours.
1
2
3
