FERRO 100 II Part 2 Overview – Operation - Spare parts lists
Action in case of power failure
2018-03-26
45
31 Action in case of power failure
Fig. 72: ON/OFF switch
NOTE!
The FERRO II is equipped with a restart interlock. In
case of a power cut, the system must be restarted
by pressing the push button control voltage
ON/OFF.
NOTE!
The mortar hoses must be cleaned immediately.
Before opening the couplings ensure that there is
no more pressure on the hoses (observe display at
mortar manometer)!
32 Measures to be taken in case of water outage
NOTE!
Water can be supplied to the machine from a
container by means of suction strainer (article
number 00 00 69 09).
33 Measures in case of risk of frost
33.1
Remove the water hose
Fig. 73: Remove the water hose
Disconnect the water hose from the water manifold or from the
water tank.
Disconnect the water hose form the mixing tube.
Fig. 74: Empty water tank
Empty water tank.
