FERRO 100 II Part 2 Overview – Operation - Spare parts lists
Maintenance
46
2018-03-26
NOTE!
In case of a currentless machine, the solenoid
valves of the water supply automatically open and
the water can run off, so that there is no more
water in the water supply when there is a risk of
frost.
As soon as the machine is supplied with power,
the solenoid valves close again.
34 Maintenance
Basic information
WARNING!
Risk of injury due to improperly carried out
maintenance work!
Improper maintenance can lead to severe injuries
or considerable property damage.
Therefore:
– Prior to starting the works ensure that there is
enough space to carry out the works.
– Ensure order and safety at the assembly site!
Loose components and tools on top of one
another or lying about pose potential accident
risks.
– f components were removed, ensure proper
assembly and put back all fastening elements.
Electrical system
Fig. 75:
Remove connection cable
DANGER!
Danger to life from electric current!
There is danger to life if you come in contact with
live parts. Activated electrical components can
carry out uncontrolled movements and cause
serious injuries.
Therefore:
– Switch off the energy supply before starting any
work and secure against restarting.
– Disconnect the power supply by removing the
connection cable.
