FERRO 100 II Part 2 Overview – Operation - Spare parts lists
Refilling the silo
2018-03-26
51
35 Refilling the silo
NOTE!
The silo can be refilled during operation.
36 Disassembly
After the useful service life has expired, the device has to be
dismantled and disposed of in an environmental-friendly manner.
36.1
Safety
Personnel
Disassembly must be carried out by specially trained technical
personnel only.
Work on the electrical system must be carried out by qualified
electricians only.
Basic information
WARNING!
Risk of injury in case of improper disassembly!
Stored residual energies, sharp components,
points or edges at and inside the device or at the
required tools might cause injuries.
Therefore:
– Prior to starting the works ensure that there is
sufficient space.
– Carefully handle components with sharp edges.
– Ensure order and cleanliness at the working
place! Loose components and tools on top of
one another or lying about pose potential
accident risks.
– Dismantle components correctly. Pay attention
to partly high dead weight of the components. If
required use lifting equipment.
– Secure components that they do not fall down
or fall over.
– In case of doubt, consult the dealer.
Electrical system
DANGER!
Danger to life from electric current!
There is danger to life if you come in contact with
live parts. Activated electrical components can
carry out uncontrolled movements and cause
serious injuries.
Therefore:
– Prior to beginning the disassembly, switch off
the power supply and finally disconnect it.
