____________________________________________________________________________________________________________
PFT G 5 c FU 230
27
Accessories
01.2005
____________________________________________________________________________________________________________
________________________________________________________________________________________
Knauf PFT GmbH & Co. KG
Telephone
09323 / 31-760
PO Box 60
Telefax
09323 / 31-770
D-97343 Iphofen
Internet
www.pft.de
________________________________________________________________________________________
PFT injection hood for G 5 (item no. 00 04 43 34)
The PFT injection hood is for feeding the dry material into the PFT G 5 c FU 230
mixing pump with the help of the SILOMAT system.
PFT delivery hood for G 5 (item no. 00 00 85 45)
The PFT delivery hood is for feeding dry material into the PFT G 5 c FU 230 mixing
pump directly from the silo / container. If the material hopper of the PFT G 5 c FU 230
mixing pump is reported to be empty.
ROTOMIX D pumps with size 35 coupling (item no. 20 11 80 00)
Agitator for improved solubilization and mixing of the material.
Direct drive via rotor tangs. Volume approx. 1.2 l
Follow all guidelines from the mortar manufacturer!
ROTOQUIRL II with size 35 coupling (item no. 20 11 84 00)
Agitator for improved solubilization and mixing of the material.
Direct drive via rotor tangs. Volume approx. 4.2 l
Follow all guidelines from the mortar manufacturer!
Star wheel distance disk for coarse plaster (item no. 20 10 19 00)
Increases the gap between the star wheel and the floor of the material hopper by
3 mm.
Cap for water intake with Geka coupling
(item no
. 20 21 58 00)
For improved injection of water into the mixing area with low water factor.
