Mixing pump G 4 X Super / G 4 X XL / Part 2 Overview, operation and service
Description
4.2
Operating principle G 4 X Super / G 4 X XL
Figure 9: G 4 X Super / G 4 X XL
The dry section to accommodate the ready-mixed mortar is separated
from the mixing and pumping section. The dry mortar it thrown into
the mixing chamber via the inclined star wheel. The PFT G 4 X can be
started and refilled at any time. The star wheel is powered separately
and can be quickly disassembled using a central locking mechanism.
4.3
Brief description G 4 X Super / G 4 X XL
Figure 10: G 4 X Super / G 4 X XL
The new mixing pump G 4 X with 400V three-phase drive was
specially developed for pumping, spraying and applying dry mortar,
pasty materials for machine use and much more up to 3 mm grain
size.
The pump output can be adjusted by means of a quick pump change
depending on the requirements.
The machine can be filled with bagged material as well as directly
from a silo/container by means of delivery hood or injection hood and
PFT SILOMAT installation.
4.4
Fields of application
For pumpable pre-mixed dry mortar such as:
gypsum plasters
lime/gypsum plasters
cement plasters
lime plasters
fango material
insulation plasters
filling plasters
armour and glueing mortar
floor screed
masonry mortar
.... and much more
page 20 / 72
