Mixing pump G 4 X Super / G 4 X XL / Part 2 Overview, operation and service
Operation
Figure 47: Injection hood
Feeding with injection hood:
Item no. 20600213
Fit the delivery hood instead of the grille cover.
WARNING
Risk of injury at the star wheel!
Do not open the machine during pneumatic conveying.
Before opening, turn off the master switch/main
reversing switch and interrupt the power supply.
NOTE
First feed material to the mixing pump G 4 X. Pull the
dummy connector or switch off the machine using pres-
sure control air. Start your work only when the level
sensor indicates full.
5.4
Shutdown in case of emergency
Shutdown in case of emergency
In dangerous situations, machine movements have to be stopped as
quickly as possible, and the power supply has to be disconnected.
In case of danger proceed as follows:
1. Switch off the main switch immediately.
2. Secure the main switch against reactivation.
3. Inform responsible person at the operational site.
4. If necessary call for medical assistance and fire brigade.
5. Recover persons from the danger zone, initiate First Aid measures.
6. Keep access routes free for emergency vehicles.
7. If the severity of the emergency permits, inform the competent
authorities.
8. Assign specialised personnel with the troubleshooting.
After the rescue operations
WARNING
Danger to life from premature reactivation!
On reactivation there is danger to life for all persons in the
danger zone.
Ensure that the danger zone is clear before switching
the machine back on.
Check the system before reactivation and ensure that
all safety equipment is installed and functional.
9. Check the system before reactivation and ensure that all safety
equipment is installed and functional.
page 38 / 72
