PFT continuous mixer HM 2002 Overview - Operation - Spare parts lists
Apply mortar
2017-03-14
27
27 Apply mortar
DANGER!
Risk of injury from discharged mortar!
Discharged mortar may lead to injuries to eyes and
face.
– Always wear protective goggles.
– Always position yourself in such a way that you
are not hit by the mortar being discharged.
28 Interruption of work
NOTE!
Always observe the setting time of the material to be
processed:
Clean the mixing tube depending on the setting time
of the material and the duration of the interruption
(pay attention to outside temperature).
The guidelines of the material manufacturers have to
be observed regarding breaks.
29 Switching off the machine
29.1 Switching off HM 2002 230 V
Fig. 31: Switching off at 230 V
1. Switch off the machine using the red switch.
29.2 Switching off HM 2002 120 V
Fig. 32: Switching off at 120 V
EMERGENCY STOP button:
1. Switch the machine off by pressing the red push button (1).
2. The machined is switched off in this pressed state.
NOTE!
Turn the button to the right (in the direction of the
arrow) to loosen the button.
1
1
