PFT continuous mixer HM 2002 Overview - Operation - Spare parts lists
Stopping in case of an emergency
28
2017-03-14
30 Stopping in case of an emergency
30.1 Emergency-stop switch
Stopping in case of an emergency
In dangerous situation machine movements have to be stopped as
quickly as possible, and the power supply has to be disconnected.
1
2
Fig. 33: Stopping
In case of danger proceed as follows:
1. Switch off the machine by pressing the red push button (1).
2. Switch off the machine by pressing the red push button (2).
3. Disconnect power supply.
4. Inform responsible person at the operational site.
5. If necessary,
call for medical assistance and a fire brigade.
6. Recover persons from the danger zone, initiate First Aid
measures.
7. Keep access routes free for emergency vehicles.
After the rescue operations
8. If the severity of the emergency permits inform the competent
authorities.
9. Assign specialised personnel with the troubleshooting.
WARNING!
Danger to life from premature reactivation!
On reactivation there is danger to life for all
persons in the danger zone.
Before reactivation ensure that there are no
persons in the danger zone anymore.
10. Check the system before reactivation and ensure that all safety
equipment is installed and functional.
31 Action in case of power cut
31.1 Disconnect power supply.
Fig. 34: Disconnect power supply.
1. Disconnect power supply.
2. Let qualified staff check the power supply.
NOTE!
The machine is equipped with a restart interlock.
The machine must be restarted after power failure.
