PFT SCREW MIXER HM 24 Overview – Operation – Spare Parts Lists
Maintenance
2017-08-07
27
24.3 Maintenance schedule
If increased wear and tear is detected during the regular checks,
shorten the required maintenance intervals according to the actual
wear and tear.
After every operation, check the following parts for defects:
bearings, hauling bracket, all connectors, hose connections and
power cable connections.
24.4 Dirt trapping sieve
Check dirt trapping sieve in the water inlet daily:
1. Take out dirt trapping sieve from the Geka coupling.
2. Clean dirt trapping sieve.
3. Replace sieve if there are thick dirt deposits.
4. Reinsert dirt trapping sieve
.
Dirt trapping sieve Geka coupling: Article No. 20152000
Remove and clean the dirt filter in the water inlet and in the
pressure reducer at least once every two weeks. Replace them, if
necessary. Open filter holder with special spanner ( Item
no. 20 10 24 00 ).
