____________________________________________________________________________________________________________
PFT HM 6 TITAN 400V
13
Accessories
Version 02.2003
____________________________________________________________________________________________________________
_______________________________________________________________________________________
Knauf PFT GmbH & Co.KG
Telefon
09323 / 31-760
Postfach 60
Telefax
09323 / 31-770
D-97343 Iphofen
info@pft-iphofen.de
_______________________________________________________________________________________
Measures for Power Failure
The PFT HM 6 equipped with a restart lock. After a power failure switch on the ma-
chine at the main switch for operation.
Measures for Water Supply Failure
In case of a water supply failure, the PFT HM 6 will keep on running without mixing
the material. As soon as the fault is rectified, the HM 6 will mix material quite normally
again.
Measures for Subzero Temperatures
Empty the water manifold of the PFT HM 6 completely at subzero temperatures
- Depressure water connection and decouple it
- Open taps on manifold
Transport
- Disconnect power cable
- Depressure water connection and decouple it
- Dismantle machine components and transport them individually
Maintenance
WARNING!
Disconnect all power cables to carry out maintenance or assembly work.
After every operation, check the following parts for defects: bearings, hauling bracket,
all connectors, hose connections and power cable connections.
Remove and clean the dirt filter in the water inlet and in the pressure reducer at least
once every two weeks. Replace them, if necessary.
Accessories
PFT Dosing mixing shaft
Dosing mixing shaft 45 l / min , item no 00 04 62 74
Dosing mixing shaft 60 l / min , item no 00 04 58 45
