background image

 

 

____________________________________________________________________________________________________________  

PFT HM 6 FU 230V HYMIX 

General 

Status 11.2004 

____________________________________________________________________________________________________________  

_______________________________________________________________________________________ 

 

Knauf PFT GmbH & Co. KG 

 

Telephone  09323 / 31-760 

PO Box 60 

 

Fax 

09323 / 31-770 

D-97343 Iphofen 

 

Internet 

www.pft.de 

_______________________________________________________________________________________ 

Dear PFT customer 

 

Congratulations on your purchase. You have made a good choice, as you appreciate the quality of a brand 

product from a good company. 

 

The PFT 

HM 6 

 is state-of-the-art. It has been designed in such an easy-to-use manner to provide you with a 

true assistant in the tough building site conditions. 

 

These operating instructions should always be kept handy at the place of use of the machine. They inform 

you about the different functions of the equipment. Prior to starting the machine, the operating instructions 

must be studied thoroughly, as we will not accept any liability for accidents and material damage that have 

occurred as a result of incorrect operation. 

When operated correctly and with careful treatment, the PFT 

HM 6 

 will be a true assistant. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The passing on of this publication, even in excerpts, is strictly forbidden without our prior permission. All technical 

specifications, illustrations etc. are subject to copyright protection. All rights are reserved. Errors shall remain excepted. 

Subject to change without notice. 

 

 

Summary of Contents for HM 6 FU 230V HYMIX





























Reviews: