____________________________________________________________________________________________________________
PFT HM 6 FU 230V HYMIX
7
Basic safety notices
Status 11.2004
____________________________________________________________________________________________________________
_______________________________________________________________________________________
Knauf PFT GmbH & Co. KG
Telephone 09323 / 31-760
PO Box 60
Fax
09323 / 31-770
D-97343 Iphofen
Internet
www.pft.de
_______________________________________________________________________________________
1. All safety and danger information on the machine must be observed and kept in a read-
able state!
2. The machine must be checked for any external damage and faults at least once per shift!
If any safety-relevant changes must be made to the machine or its working manner, the
machine must first be brought to an immediate standstill and the fault reported to the per-
son responsible!
3. Do not make any modifications, add any attachments or make any conversions to the
machine that would not guarantee the safety, without consultation with the supplier! This
also applies to fitting unchecked “safety equipment”!
4. Spare parts must comply with the manufacturer’s technical requirements. This is always
ensured with original PFT parts!
5. Only trained or instructed personnel may use the machine. The responsibility for person-
nel who are operating, tooling, maintaining and servicing the machine must be clearly es-
tablished!
6. Any personnel who are to be trained, taught, instructed or generally trained must be used
under on the machine under the supervision of an experienced person!
7. Work on the electrical equipment of the machine may only be carried out by an electrician
or by instructed persons under the supervision of an electrician, in accordance with elec-
tro technical regulations.
8. Switch-on and switch-off processes, control displays must be observed in accordance
with the operating instructions.
9. If the machine is completely switched off for maintenance and service work, it must be
secured against any unexpected restarting (e.g. lock the main switch and remove the key
or attach a warning sign to the main switch).
10. Prior to cleaning the machine with the water jet, all the openings must be sealed, so that
no water can penetrate (electromotor and switch cabinets) for safety and function rea-
sons. After cleaning, remove the coverings completely.
11. Use only the original fuses with stipulated current!
12. If work is necessary on the live parts, a second person must be called upon who can
break the current in the event of an emergency.
13. Even with a slight change in location, the machine must be interrupted from any external
energy supply. Prior to restarting, the machine must again be properly connected to the
mains.
14. The machine must be set up in a safe manner and secured against any undesired move-
ment.
15. The pipelines must be laid safely and not around sharp edges!
16. Prior to opening the pipeline connection, a depressurised state must be achieved!
17. When remedying blockages, the person clearing the block must position him/herself in
such a way that any escaping mortar cannot hit him/her. Protective goggles must also be
worn. Other persons may not be situated in close vicinity to the machine!
18. If a continuous pressure level of 85 dB(A) is exceeded, a suitable sound insulation
means must be provided.
19. When spraying, if necessary, suitable personal protection must be worn: protective gog-
gles, protective clothing, gloves, possibly skin cream and breathing protection.
20. The machine must be checked by a specialist as and when required, however at least
once per year.
