____________________________________________________________________________________________________________
PFT HM 6 FU 230V HYMIX
8
Setting values and starting up
Status 11.2004
____________________________________________________________________________________________________________
_______________________________________________________________________________________
Knauf PFT GmbH & Co. KG
Telephone 09323 / 31-760
PO Box 60
Fax
09323 / 31-770
D-97343 Iphofen
Internet
www.pft.de
_______________________________________________________________________________________
Pressure reducing valve
1.9 bar at 1000 l/h (maximum opening).
Power connection
In accordance with VDE conditions, connect the machine only to an assembly for con-
struction site (with stipulated FI safety switch).
Use power cable 5x2.5mm² with CEE coupling 400 V, 3x16A PFT article number 20
42 33 50.
Connect a
mixer motor.
Water connection
Create a connection to a water supply with 3/4“ pipe. Open the supply until water
emerges at the end of the pipe so as to bleed the hose and clean out any dirt.
Close the supply.
Connect the water pipe to the water inlet (dust collector filter).
Open the supply.
Connect the
water hose
from the needle valve on the mixing tube.
ATTENTION!
When working from a water container, a filter screen must be inserted in the suction
basket (article number 00 00 69 06). (Bleed the water pump!)
