PFT JETSET pro in case Safety - Overview - Operation - Spare parts lists
Safety
14
2017-10-10
Wear for special work
While carrying out special work, special equipment is required. It is
separately mentioned in the individual chapters of this manual.
This special protective equipment is explained below:
Face guard
to protect the eyes and the entire face from flames, sparks or heat
as well as from particles or exhaust gases.
7.6 Special risks
The residual risks are mentioned in the following section, which are
obtained from the danger analysis.
Follow the safety instructions specified here and the warning
instructions in the other chapters of the manual, in order to reduce
the health risks and to avoid dangerous situations.
Electric current
DANGER!
Danger of death from electric current!
There is danger of immediate death if live parts are
touched. Damage to insulation or individual parts
can be fatal.
Therefore:
– Switch off the power supply immediately if the
insulation is damaged and arrange for repairs.
– Work on the electrical system must be carried
out by qualified electricians only.
– Switch off the electrical system to work on it and
ensure that the voltage has been cut off.
– Switch off the power supply before any
maintenance, cleaning or repair work and
secure from restarting.
– Do not shunt or decommission any fuses.
Adhere to the correct ampere count when
replacing fuses.
– Keep live parts moisture-free. It can lead to
short-circuit.
