PFT JETSET pro in case Safety - Overview - Operation - Spare parts lists
Maintenance
2017-10-10
31
24 Maintenance
Basic information
WARNING!
Risk of injury due to improperly carried out
maintenance work!
Improper maintenance can lead to severe injuries
or considerable property damage.
Therefore:
Ensure order and safety at the assembly site!
Loose, stacked components or components lying
about can cause accidents.
If components were removed, ensure proper
assembly, put back all fastening elements and
observe torque indications for screws.
Electrical system
DANGER!
Danger of death from electric current!
There is danger to life if you come in contact with
live parts. Activated electrical components can
carry out uncontrolled movements and cause
serious injuries.
Therefore:
−
Switch off the energy supply before starting any
work and secure against restarting.
−
Disconnect the power supply by removing the
connection cable
24.1 Maintenance plan
After finishing the maintenance works and prior to switching on the machine,
the following steps have to be carried out:
1. Check all previously loosened screw connections for secure fit.
2. Check if all previously removed safety systems and covers are properly
reinstalled.
3. Ensure that all used tools, materials and other pieces of equipment were
removed from the work area.
4. Clean the work area and remove any spilled materials such as liquids,
processing materials or similar.
5. Ensure that all safety systems of the installation work perfectly.
