PFT JETSET pro in case Safety - Overview - Operation - Spare parts lists
Disassembly
32
2017-10-10
25 Disassembly
After the useful service life has been reached, the device has to be
dismantled and disposed off in an environmental-friendly manner.
25.1 Safety
Personnel
Disassembly must be carried out only by specially trained
technical personnel.
Work on the electrical system must be carried out by qualified
electricians only.
Basic information
WARNING!
Risk of injury in case of improper disassembly!
Stored residual energies, sharp components, points
or edges at and inside the device or at the required
tools might cause injuries.
Therefore:
Prior to starting the works ensure that there is
sufficient space.
Carefully handle components with sharp edges.
Ensure order and cleanliness at the working place!
Loose components and tools on top of one
another or lying about pose potential accident
risks.
Dismantle components correctly. Pay attention to
partly high dead weight of the components. If
required use lifting equipment.
Secure components that they do not fall down or
fall over.
In case of doubt, consult the dealer.
Electrical system
DANGER!
Danger to life from electric current!
There is danger to life if you come in contact with live
parts. Activated electrical components can carry out
uncontrolled movements and cause serious injuries.
Therefore:
Prior to beginning the disassembly, switch off the
power supply and finally disconnect it.
