PFT Horizontal Screw Mixer LOTUS XS Overview – Operation
Preparation of the machine
2019-11-07
21
Basic information
WARNING!
Danger of injury due to improper operation!
Improper operation can lead to serious injuries or
equipment damage.
Therefore:
Carry out all operating steps according to this
operating manual.
Before starting any work, ensure that all covers
and protective devices are installed and
functioning properly.
Never
disable
protective
devices
during
operation.
Keep the operating area clean and tidy.
Components and tools that are stacked on one
another or left lying around can cause accidents.
An increased noise level can cause permanent
hearing loss. Operation can result in noise that
exceeds 78 dB (A) in close proximity to the
machine. Close proximity is defined as the area
within 5 metres of the machine.
19 Preparation of the machine
Before operating the machine, carry out the following
preparations:
Fig. 24: Protective grille
DANGER!
Rotating dosing shaft
Reaching into the material hopper poses a risk of
injury.
- The protective grille (1) should not be removed
while preparing or operating the machine.
- Never reach into the machine while it is running.
Fig. 25: Set-up
The controls must be freely accessible.
Install the machine on stable and even ground and secure it
against accidental movements.
Do not tilt or roll the machine away.
Place the machine where it cannot be hit by any falling objects.
1
