____________________________________________________________________________________________________________
PFT N2V/N2 FU 400V
9
Description of functions
04/2004
____________________________________________________________________________________________________________
_______________________________________________________________________________________
Knauf PFT GmbH & Co.KG
Tel.
+49 (0) 9323/31-760
Postfach 60
Fax
+49 (0) 9323/31-770
D-97343 Iphofen
Internet
www.pft.de
_______________________________________________________________________________________
The
PFT N2V
conveying pump is a small conveying small for applying finishing coats
of up to 3 mm, water-based paints, concrete primer and similar materials using a
spraying gun, paint gun or wool fleece roller.
Please observe the processing guidelines of the material manufacturer.
The machine consists of portable single components of small, handy dimensions and
light weight that allow fast, convenient transport.
When operating the machine, the following aspects must be observed:
1.
Connection distributor box* – control box
2.
Connection control box – compressor
3.
Connection air hose – spraying gun / paint gun
4.
Connection pressure flange – mortar pressure gauge
5.
Connection mortar pressure gauge – mortar hose
6.
Connection mortar hose – spraying gun / paint gun
*If the N2 FU 400 is connected, the distributor box must be equipped with an FI safety
switch sensitive to all currents. If this is not the case, a PFT intermediate distributor,
type no. 00021223 can be used.
