___________________________________________________________________________________________________________
PFT N2V/N2 FU 400V
14
N2 FU 400V start-up
12/2004
___________________________________________________________________________________________________________
_______________________________________________________________________________________
Knauf PFT GmbH & Co.KG
Tel.
+49 (0) 9323/31-760
Postfach 60
Fax
+49 (0) 9323/31-770
D-97343 Iphofen
Internet
www.pft.de
_______________________________________________________________________________________
N2 FU 400V start-up
Connect the power connection (1) to the power supply (1) 400 V, 32 A fuse with
FI safety switch 30 mA sensitive to all currents
Pull the blind plug (2)
Connect the pump motor
Connect the mortar pressure gauge
Connect the material hose to the mortar pressure gauge
Fill the material hopper with mortar
Set the speed to minimum
Main switch (1)
ON
Turn the selection switch (2) to the forwards position
Insert blind plug (1) machine runs
Control lamp (2) glows
or connect remote control
and
Open tap (1)
Switch on machine using remote control (2)
2
1
2
2
1
1
1
2
2
2
1
