___________________________________________________________________________________________________________
PFT N2V/N2 FU 400V
16
N2V/N2 FU 400 V start-up
12/2004
___________________________________________________________________________________________________________
_______________________________________________________________________________________
Knauf PFT GmbH & Co.KG
Tel.
+49 (0) 9323/31-760
Postfach 60
Fax
+49 (0) 9323/31-770
D-97343 Iphofen
Internet
www.pft.de
_______________________________________________________________________________________
WARNING!
When work is interrupted, first switch the machine off using the remote control and
then close the tap on the spraying gun or the paint roller. Start up the system in
reverse order.
WARNING!
Leave the speed at a minimum level, as otherwise the conveying pressure in the
material hose becomes too high.
WARNING!
The green ON button must always be pressed if the control box was without power.
Never let the pump run dry.
WARNING!
The protection grille of the material hopper may not be removed while the machine is
being set and the
PFT N2V/N2 FU 400
conveying pump is in operation.
Before starting the spraying or pumping process, all hoses must be rinsed with water
and then completely emptied. The hoses must be then lubricated with lime milk if
necessary (depending on the manufacturer's specifications).
The
PFT N2V/N2 FU 400
conveying pump can be loaded with a screw mixer (e.g.
HM 2002, HM 2006, HM 22 / 24, HM 106, HM 200, HM 5, HM 6, etc.) or from ready-
mixed containers.
Interruption of work
NOTE
Depending on the material, longer interruptions should be avoided as the material
may solidify in the pump and hoses. The manufacturer's guidelines should be
observed at all times (processing time, weather influences such as sun and heat,
etc.).
It is recommended to clean the pump prior to longer interruptions.
Every interruption of the spraying procedure results in minor irregularities of the mortar
consistency. This normalises itself however, as soon as the machine has been
working for a short while.
