Part 2 EC Declaration of Conformity Overview – Operation
Brief description of RITMO L plus powercoat
2020-03-25
23
22 Brief description of RITMO L plus powercoat
Fig.28: RITMO L plus powercoat
The proven mixing pump PFT RITMO L plus powercoat is
equipped with a revolutionary stainless steel remixer, which
makes it possible for the first time to grind nodules
mechanically. Thus, a homogeneous sprayable filling
compound is produced. A material that was previously mixed by
hand with a spatula in a time-consuming process.
The pump output can be adjusted electronically in the range of
74 - 492 rpm depending on requirements.
The machine should generally be started up at maximum speed
to avoid malfunctions.
The dry material is mixed with water and blended in the mixing
zone.
The water flow rate is adjusted manually at the needle valve.
The flow rate can be seen on the plug in the water flow meter.
A pressure switch monitors the water flow pressure, should this
fall below 1.6 bar, the machine switches off automatically.
The RITMO L plus powercoat can also be filled with pasty
materials during pump operation. Turn the pump selector switch
to the right. A water connection is not necessary as the water
safety switch is bridged by an electrical control.
The PFT RITMO L plus powercoat consists of portable
individual components, which allow a fast and comfortable
transport with handy dimensions and low weight.
