Part 2 EC Declaration of Conformity Overview – Operation
Transport, packaging and storage
26
2020-03-25
26.3 Closing the snap lock before transport
Fig. 31: quick fastener
CAUTION!
Generally make sure that the snap lock (1) on the gear
motor and on the material hopper is closed when
the machine is moving.
26.4 Transport checklist
Inspect the goods for damage and missing parts immediately
after delivery.
If external transportation damage can be seen, proceed as follows:
Do not accept the delivery, or accept it only under reservations.
Note the damage on the transportation documents or
the delivery note of the carrier.
Submit the appropriate claim.
NOTE!
Always submit a claim for the defects as soon as
they are detected. Damage claims can only be
accepted within the applicable deadlines for
submission.
26.5 Transport in individual parts
1
Fig. 32: Opening
the rotary bolt
Fig. 33:Individual parts
1. To make transport easier, disassemble the machine into
its individual components.
2. The units mixing tube with material hopper and pump,
gear motor with tilt flange and chassis.
3. Release cable and hose connections. Open rotary bolt (1)
(Fig. 32).
4. Remove mixing tube with material hopper from the chassis.
1
