Part 2 EC Declaration of Conformity Overview – Operation
Preparation of the machine
2020-03-25
29
Personal protective equipment
All machine operators must wear the following protective equipment:
Protective work clothing
Safety goggles
Safety gloves
Safety shoes
Ear protection
NOTE!
The warning signs illustrated relate to additional
protective equipment that must be worn for
particular working conditions.
29 Preparation of the machine
Before operating the machine, carry out the following work steps
as preparation:
Fig. 35: Protective grille
DANGER!
Rotating mixing shaft!
Reaching into the material hopper poses a risk
of injury.
The protective grille (1) should not be removed
during operation or while preparing the machine.
Never reach into the machine while it is running.
Fig. 36: Set-up
Install the machine on stable and even ground and secure
it against accidental movements:
Do not tilt or roll the machine away.
Place the machine where it cannot be hit by any falling objects.
The controls must be freely accessible.
Keep a free space of approx. 1.5 metres around the machine.
1
