Part 2 EC Declaration of Conformity Overview – Operation
Applying material
44
2020-03-25
NOTE!
Before the first spraying cycle, it is recommended to
run the machine briefly without spray nozzle until
material has emerged from the spray head.
Then screw the nozzle back onto the spray head.
The delivery pressure may rise to 30 bar for a short
time, but will fall back to the normal working pressure
of 12-15 bar after a short running time.
48.1 Opening the air valve on the spray gun
Fig. 81: Opening the air valve
1. Point the spray gun toward the wall to be plastered.
2. Check that no-one is in the spray gun range.
3. Open the air valve (2) on the spray gun and the compressor will
start (with pressure switch-off).
4. The machine starts automatically as soon as the handle (3) at
the spry gun is pressed.
48.2 In the event of a work stoppage / pause
NOTE!
See chapter 42.2 – 42.3 work stoppage/pause
1
2
