Part 2 EC Declaration of Conformity Overview – Operation
Switching off RITMO powercoat
58
2020-03-25
56.3 Remove the suction flange
4
3
2
1
Fig. 103: Cleaning the rubber mixing
zone
1. Uncouple the water hose (1) from the rubber mixing tube (2).
2. Undo screw (3) for the pressure flange (4).
3. Remove and clean the suction flange (4).
4. Pull the rubber mixing zone (2) out oft he material hopper and
clean it
5. Push the cleaned rubber mixing zone (2) back in the material
hopper.
6. Refasten the suction flange (4) with nuts.
56.4 Complementing the remixer with a pump unit
Fig. 104: Remixer / pump unit
1. Reassemble with new rotor and stator or cleaned parts.
NOTE!
Only store assembled pumps (rotor in stator) for a
few days, since longer storage may cause the
rotor and stator to become inseparably joined
57 Switching off RITMO powercoat
Fig. 105: Switching off RITMO
1. Turn the selector switch (1) to the “Zero” position
(middle position).
2. Turn the main switch (2) to the position “0”.
2
1
