Mixing pump RITMO L plus FC-230V Overview – Operation
Description of the PFT pressure booster pump (accessories)
24
2020-11-09
22 Description of the PFT pressure booster pump
(accessories)
22.1 Application area of pressure booster pump
The PFT pressure booster pump is used predominantly as
a high-pressure pump for installation between the mortar mixer
and the mortar mixer pumps when the water pressure is too low.
It can also be used as a primer pump for drawing liquids from
containers, for emptying small tanks and ponds, for pumping
water out of cellars and for irrigation.
The water supply is automatically ensured from a water tank by
the PFT pressure booster pump for the constant water supply to
the PFT machine engineering.
The flow pressure of min. 2.5 bar when the machine is running is
ensured on size by drawing water from the water tank.
Connection example
Fig. 40:
Pressure booster pump
and water barrel
00 49 36 86 Item number for the
pressure booster pump AV3000/1
Accessories
Inlet strainer with stainless steel filter screen, 1" suction hose, 2.5 m
Item no. 00 13 66 19
22.2 Proper use of the machine
Caution!
The PFT pressure booster pump only serves for
pumping clean water, recommended for water
relatively polluted with impurities and chemically
non-aggressive liquids. Media with fibrous
and abrasive constituents must be avoided.
Its use is subject to the regulations of
the local legislation.
