Mixing pump RITMO L plus FC-230V Overview – Operation
End of shift / Cleaning
2020-11-09
57
54.9 Placing the machine on its rear
Fig. 109:
Turning over the machine
NOTE!
For easier pump replacement / pump cleaning,
the RITMO can be placed on its rear.
54.10 Cleaning the rubber mixing zone
Fig. 110: Removing the pump unit
1. Uncouple water hose (1) from the mixing tube.
2. Undo screw (2).
3. Remove pump unit (3) with mortar pressure gauge and clean.
Fig. 111: Cleaning the rubber
mixing zone
4. Pull rubber mixing zone out of the material hopper and clean.
5. Reinsert or mount rubber mixing zone and pump unit
after cleaning.
Fig. 112: Position of the rubber
mixing zone
6. Ensure that the rubber mixing zone fit correctly.
7.
Turn the rubber mixing zone to the left as far as it will go.
1
2
2
3
