Mixing pump RITMO L plus FC-230V Overview – Operation
Switching off RITMO L plus
2020-11-09
59
56 Switching off RITMO L plus
Fig. 117:
Switching off RITMO
1. Turn the selector switch (1) to the “Zero” position
(middle position).
2. Turn the main switch (2) to the position “
0
”.
57 Measures to be taken if there is a risk of frost
CAUTION!
Damage due to frost!
Water that expands on freezing inside
the component can cause serious damage.
Therefore:
Carry out the following steps when the pump is
not operating and there is a danger of frost.
Fig. 118: Disconnecting the water supply
1. Remove the water hose (1) from the water inlet.
2. Remove water hose (2) from the water nozzle at the rubber
mixing zone.
Fig. 119: Removing the mixing shaft
3. Take mixing shaft (3) out of the mixing zone.
2
1
2
1
3
