Mixing Pump RITMO XL FU 230/400 reversible Overview – Operation
Operating modes
2019-05-13
19
16 Operating modes
16.1 Air compressor selector switch
Fig. 15:
Operating modes of compressor
The air compressor can be operated in two different operating
modes:
Position "0":
The air compressor is switched off (for example for pumping
screed).
Position "1":
For spraying plaster with compressed air.
As soon as the air compressor has built up pressure in the
piping system, it switches off via the pressure cutoff.
16.2 Pump motor selector switch
Fig. 16:
Operating modes of pump motor
The pump motor has three operating modes:
Selector switch position “0”:
The machine is switched off.
Selector switch (latching):
The machine starts up when the main switch is switched on.
Selector switch left (spring return):
The pump motor goes into reverse, thereby relieving the pump
and locking other functions.
16.3 Water selector switch
Fig. 17:
Water selection switch
The RITMO XL can be used for two application areas:
Selection switch (latching):
The machine is operated without water.
Use as pump.
Selector switch left (latching):
The machine is operated with water.
Use as mixing pump.
