Mixing Pump RITMO XL FU 230/400 reversible Overview – Operation
Material
2019-05-13
27
24 Material
24.1 Flowability / conveying property
NOTE:
The SD6-3 pump can be used at up to 30 bar operating pressure.
The D4-3 pump can be used at up to 30 bar operating pressure.
The possible conveying distance depends essentially on the flow properties of the material.
Fluids, priming materials, colours etc. have good flow properties.
The material hose lengths must be shortened if the operating pressure exceeds 30 bar.
To avoid machine faults, increased wear and tear of the pump motor, pump shaft and pump,
please use original PFT spare parts only such as:
PFT rotors
PFT stators
PFT pump shafts
PFT mortar hoses are to be used
These are made for each other and form a constructive unit with the machine.
Non-observation will not only make the warranty null and void, the user must also contend
with mortar of bad quality.
25 Mortar pressure gauge
Fig. 30: Mortar pressure gauge
Important!
For reasons of safety, the use of a mortar pressure
gauge is recommended.
PFT mortar pressure gauge
Benefits of the mortar pressure gauge:
Exact regulation of correct mortar consistency
Constant monitoring of correct conveying pressure.
Early detection of clogging or overloading of pump motor.
Produces zero pressure.
Contributes significantly to the safety of operating personnel.
Long lifespan for PFT pump components
26 Safety regulations
Important!
When performing any work, observe the locally applicable
safety regulations for mortar conveying and spraying
machines!
