____________________________________________________________________________________________________________
PFT SILOMAT E
20
Transport
10.2005
____________________________________________________________________________________________________________
_______________________________________________________________________________________
Knauf PFT GmbH & Co.KG
Telephone 09323 / 31-760
Postfach 60
Telefax
09323 / 31-770
D-97343 Iphofen
Internet
www.pft.de
_______________________________________________________________________________________
Transport
The conveying system SILOMAT E can be transported by several persons by hand to
the construction sight.
The conveying container can be carried to the silo / container using the two handles.
To attach it to the butterfly valve, it is raised a little, hung onto the assembly aids
(claws) and then attached to the flange using the quick-release fasteners / eye
screws. Disassembly is done in reverse order.
The carryable frame with compressor and control box has 4 carrying handles to align
the system on the ground at the silo / container.
We recommend the use of a construction site crane or loading crane to load it on to or
off trucks or trailers. The carryable frame can be safely picked up and transported at
the carrying handles using 2 round slings (see illustration).
