3)76:,1*
*%
&KHFN/LVW
9HUVLRQ
BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
________________________________________________________________________________________
+RZWRDYRLGRUTXLFNO\UHPHG\SUREOHPVZLWKWKH3)76:,1*,,
0$/)81&7,21
&$86(
62/87,21
Machine does not start!
Operation with remote control
- Power connection in order?
Check faults and rectify
- Proper connection to electrical
panel at construction site?
- FI safety switch activated?
- Operating ON switch pressed?
Display lamp lights up?
- Operating ON contact element
faulty?
- Fault lamp lights up?
- Fine fuse faulty?
- Pump stuck?
Release pump by running it in reverse
Operation with Compressor
- Air flow detector misadjusted
- Air regulation valve on spray gun
closed / clogged?
Open / clean
- Air nozzle in spraying cap
clogged?
Clean air inlet
Machine switches off during
operation!
- Motor overloaded with coagulated
material?
Adjust material to thinner consistency,
clean machine and start process again
- Motor overloaded because of long
conveying distance
or high conveying pressure?
Use hose with larger diameter and
decrease conveying distance
Motor does not switch off,
when remote control is
activated!
- Remote control or extension cable
of remote control defective ?
Repair or repair parts
