PFT
Conveying Pump SWING L
Overview – Operation
– Spare Parts Lists
Packaging
14/09/2021
23
Suspended loads
WARNING!
Danger of death due to suspended loads!
Falling or swinging parts can pose a fatal hazard
when heavy loads are lifted.
Therefore:
– Never step underneath suspended loads.
– Follow instructions regarding the provided
suspension points.
– Do not attach lifting tackle to protruding
machine parts or to eyelets of add-on
components. Ensure the lifting gear is fastened
securely.
– Only use approved lifting gear and accessories
with a sufficient load-bearing capacity.
– Do not use torn or frayed ropes and belts.
– Do not attach ropes and belts to sharp edges
and corners. Do not knot or twist the ropes.
23.4 Transportation of existing machines
Transportation
of existing machines
DANGER!
Danger of injury due to leaking mortar!
Injury to the face and eyes can occur.
Therefore:
– Make sure all hoses are depressurised before
opening the couplings (note the indicator on the
mortar pressure gauge).
Carry out the following steps before transportation:
1
.
First unplug the main power cable.
2
.
Detach all other cable connections.
3
.
Disconnect the water supply line.
24 Packaging
Packaging information
Individual packages are packed according to the applicable
transportation requirements. Only environmentally-friendly
materials were used for the packaging.
The packaging is intended to protect individual components from
harm during transportation, corrosion and other damage up to the
point of assembly. Do not destroy the packaging and only remove
it shortly before assembly.
