PFT Conveying Pump SWING L Overview – Operation – Spare Parts Lists
Monitor the machine
32
14/09/2021
32.2 Switch on air compressor 400V (accessory)
Fig. 37: Air compressor 400V
1. Switch on the air compressor, connect the plug to the control
cabinet.
32.3 Switch on air compressor 230V (accessory)
Fig. 38: Air compressor 230V
1. Switch on the air compressor, connect the plug to the control
cabinet.
33 Monitor the machine
DANGER!
Access by unauthorized persons!
The machine may only be operated in a monitored
state.
34 Processing material
34.1 Spraying material
DANGER!
Danger of injury due to leaking mortar!
Escaping mortar can lead to injuries to the eyes
and face.
Therefore:
Never look into the spraying gun.
Always wear protective goggles.
Always position the machine so that you cannot
be hit should mortar escape.
NOTE!
The maximum conveying distance depends
primarily on the flow charactistics of the mortar.
Heavy, coarse-grained mortar does not flow well.
Fluid materials have better flow characteristics.
If an operating pressure of 30 bar is exceeded,
thicker mortar hoses must be used.
